BedJet Flashing & Clock Set ErrorUpdated 2 months ago

If your BedJet 3 is chirping, the power/status light is flashing, or the unit keeps jumping back to the “Clock Set” screen, it usually points to a power issue causing the BedJet to continually reset itself. Try the quick fixes below. If you are within our two-year comprehensive warranty, we’ll replace your BedJet at no cost if needed. If you’re out of warranty, we can offer repair or replacement options.

Common symptoms

• Power/status light flashes and the unit emits short chirps

• Remote or base keeps resetting to the “Clock Set” screen

• Unit restarts on its own or won’t stay on

Quick fixes

1. Reset power to the BedJet

   1. Unplug the BedJet from the wall outlet for a minimum of 30 seconds

   2. Press the power button once on the BedJet base (short press).

   3. Wait a few seconds to see if the solid amber/orange light appears and the chirping stops after the initial startup sequence

2. Plug directly into a wall outlet

   1. Bypass power strips, surge protectors, smart plugs, and extension cords.

   2. These devices can limit or “shape” power and cause resets/chirps.

3. Try a different outlet (ideally a different room/circuit)

   1. Move the BedJet to another outlet to rule out a weak or AFCI/GFCI-sensitive circuit.

   2. If a breaker or GFCI outlet tripped, reset it and test again.

4. Regional power check (if applicable)

   1. Make sure your BedJet matches your country’s mains voltage (120 V in North America; 220–240 V in most EU/UK/AU). A mismatch can cause resets and flashing.

Tip: If the light you see is a red error light, use our “Error Lights On” guide for code-specific troubleshooting.

Still flashing or resetting?

• Contact our Customer Care Team at [email protected] or +1 (401) 404-5250 (US number; available during US business hours).

• Or submit a request for warranty support: go to our Support Center, select “Get Warranty Support”, and follow the prompts.