BedJet Smart Remote: Menu GuideUpdated 2 months ago

This quick guide walks through every menu option on the BedJet LCD Smart Remote so you can find (and change) the settings you want—fast.

Device Pairing

On the remote: Menu → Device Pairing

Add Device

• BedJet 3: After selecting Add Device on the remote, press and hold the Low Power button on your BedJet until the remote shows the new device has been added.
  

• BedJet 3 Mini: After selecting Add Device on the remote, press and hold the Pairing button on the Mini until the remote confirms it’s added.
  

• PowerLayer:
  

  • With its remote: press and hold ⚙ + FLAT for ~5 seconds.
    

  • On the frame: press and hold the green pairing button on the controller until the LED flashes.
    

  • For more on pairing PowerLayer or multiple devices, see Using Your BedJet 3 Remote with PowerLayer.
    
    

Delete Device

• Choose Delete Device, locate the device name you want to remove, and press the center key.
  

• The remote will confirm with “SAVED.”
  
  

Rescan

• Choose Rescan to refresh the Paired Devices list—useful after a power loss or if a device briefly drops connection.
  
  

Biorhythm (Sleep Scheduling)

On the remote: Menu → Biorhythm

• Create an hour-by-hour schedule (for example: warm at bedtime, cooler overnight, gentle warm-wake). Build the sequence that matches how you like to sleep and let BedJet run it automatically.
• For full instructions, examples, and pro tips, see our detailed guide: Biorhythm Schedules

Remote Setup

On the remote: Menu → Remote Setup

Screen Timeout

• Choose how long the display stays on before sleeping (5–30 seconds).
  
  

Brightness

• Set the LCD screen brightness to your preference.
  
  

Backlit Keys (On/Off)

• Turn key backlighting on for easy nighttime use, or off for darker rooms.
  
  

Shake & Wake (Disabled / 1–6)

• Adjust motion-to-wake sensitivity or disable it entirely.
  
  

Temp Unit °C/°F

• Switch the temperature display between Celsius and Fahrenheit.
  
  

FIRM. Version (Remote & BedJet)

• View the current firmware versions for both the Remote and the BedJet.
  
  

BedJet Setup

On the remote: Menu → BedJet Setup

Audio & Lights (BedJet 3) / Audio Setup (BedJet 3 Mini)

• Audio: Turn Audio ON/OFF (beep on power/change).
  

• Status Lights (BedJet 3 only): All Lights ON or Light Ring OFF.
  

  • Note: On startup, the light ring displays red (heat) or blue (cool) for ~30 seconds. (BedJet 3 Mini has no light ring.)
    
    

Rename Device

• Use Up/Down to pick characters, Left/Right to move, Center to save.
  

  • Tip: Don’t press Center until the name is complete.
    
    

Clock Set

• Set hours/minutes (and AM/PM where shown) with Up/Down and Left/Right; Center to save.
  

  • Used for Biorhythm schedules with END TIME steps.
    
    

Low Power Mode (BedJet 3)

• Low Power ON limits max heat draw to 800 W.
  

• Normal Power restores max heat to 1500 W.
  

  • Recommended when running two full-size BedJet 3 units on the same room/circuit (e.g., Dual Zone). (Does not apply to BedJet 3 Mini.)
    
    

Advanced

• Disable Wi-Fi: Yes/No (also disables Bluetooth and the smartphone app).
  

• Diagnostics: View any stored error logs.
  

• Factory Reset: Restore defaults for advanced troubleshooting.
  
  

Notes & Helpful Info

• Wi-Fi is not required for daily use; it’s only needed for firmware updates.
  

• All new BedJet units ship with the latest firmware already installed. You can update later via the app or the remote’s firmware-update option (when available).
  

• If you disable Wi-Fi, Bluetooth and the app are also disabled until you re-enable Wi-Fi.
  
  

Need a hand with any menu setting? We’re happy to help: [email protected] · +1 (401) 404-5250 (US business hours).