PowerLayer Remote Control GuideUpdated 2 months ago

Your PowerLayer remote makes it simple to adjust your bed with preset positions, manual controls, memory buttons, and customizable features for comfort and convenience. It also includes safety functions like Child Lock for peace of mind.

Preset Positions

Your remote includes four one-touch preset buttons. These are pre-programmed and not customizable, giving you quick access to common comfort positions:

• Flat — Returns the bed to a completely flat position.

• Snore — Raises the head section by +6° to help reduce snoring.

• Zero G — Lifts the head and feet into a Zero Gravity posture for balanced pressure relief and comfort.

• TV — Positions the head and feet for relaxed TV viewing or reading.

How to use: Press a preset once to move. Press any button to stop mid-adjustment.

Manual Adjustments

For precise positioning, you can manually raise or lower the head and foot sections:

• Press the Up or Down arrow on the Head button to raise or lower the head section.

• Press the Up or Down arrow on the Foot button to raise or lower the foot section.

This lets you select exact angles outside of the preset options.

Memory Positions

Save your favorite positions for easy recall:

1. Adjust the PowerLayer to your desired position.

2. Press and hold M1, M2, or M3 until the bed wiggles to confirm.

3. To use later, press the saved memory button (M1, M2, or M3) and the bed will return to that position.

Massage Modes

The PowerLayer massage system includes four massage types:

• Steady

• Wave

• Relax

• Pulse

How to toggle: Press SETUP (gear) + H≈ or F≈ at the same time. Each press cycles to the next mode.

Customizable Features

Your PowerLayer remote includes several adjustable features to improve ease of use and conserve battery life.

Backlight Brightness

Adjust the key backlight to fit your lighting and extend battery life.

1. Press and hold the Setup (gear) button.

2. While holding, press and hold the Up or Down arrow on the Head button.

3. Each press cycles through brightness levels.

4. Release both buttons when you reach your preferred brightness.

Sleep Timer

The remote enters sleep mode after a short delay to save battery power.

1. Press and hold the Setup (gear) button.

2. While holding, press and hold the Up or Down arrow on the Massage button.

3. Sleep time adjusts in 5-second increments, from 10 to 30 seconds.

4. The remote flashes to confirm:

   • 1 flash = 10 seconds

   • 2 flashes = 15 seconds

   • 3 flashes = 20 seconds

   • 4 flashes = 25 seconds

   • 5 flashes = 30 seconds

5. Release both buttons to save the setting.

Shake & Wake

This feature activates the backlight when you pick up the remote, making it easy to use in low light. Sensitivity can be adjusted, or the feature can be turned off.

1. Press and hold the Setup (gear) button.

2. While holding, press and hold the Up or Down arrow on the Foot button.

3. The remote flashes to confirm sensitivity:

   • 1 flash = Shake & Wake OFF

   • 2–5 flashes = Sensitivity from lowest to highest

4. Release both buttons to save the setting.

Child Lock

The Child Lock function prevents the frame from moving, which is helpful if kids or pets are around.

• Turn ON Child Lock — Press and hold SETUP (gear) + ZERO G together until the PowerLayer wiggles.

• Turn OFF Child Lock — Press and hold SETUP (gear) + M1 together until the PowerLayer wiggles.

When Child Lock is active, pressing any button will only cause a small wiggle—indicating that movement is restricted.

Need Help?

We’re happy to assist: [email protected] · +1 (401) 404-5250 (US business hours)